Sharp TINSE2026QSZZ operation manual Finisher MX-FN13, 140, Part names, Specifications

PERIPHERAL DEVICES AND SUPPLIES

FINISHER (MX-FN13)

The finisher is equipped with the offset function, which offsets each set of output from the previous set. In addition, each set of sorted output can be stapled.

Part names

The following parts can be accessed when the finisher is open.

(1)(2)

(3)

(1)Offset tray

Stapled and offset output is delivered to this tray. The tray is slidable. Extend the tray for large output (11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, A3, A4R, B4 sizes).

(2)Lever

Use this to move the finisher in order to remove a paper misfeed, replace staples, or remove a staple jam.

(4)(5)

(3)Front cover

Open this cover to remove a paper misfeed, replace staples, remove a staple jam, or remove the punch scrap case.

(4)Staple case

This holds the staple cartridge. Pull the case out to replace the staple cartridge or remove a staple jam.

(5)Staple case release lever

Use this to remove the staple case.

Specifications

	MX-FN13
Tray capacity	500 sheets (250 sheets for sizes larger than 8-1/2" x 11"R (A4R))
Paper size	Size	5-1/2" x 8-1/2" to 11" x 17" (A6R to A3)
	Weight	15 lbs. to 54 lbs. (56 g/m2 to 200 g/m2)
Offset	1-3/16" (30 mm) (Offset Tray)
Paper sizes that can be	11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R (A3, B4, A4, A4R, B5,
stapled	B5R)
	8-1/2" x 11", 8-1/2" x 11"R, A4, A4R, B5, B5R:
Stapling capacity	50 sheets (21 lbs. (80 g/m2))
	11" x 17", 8-1/2" x 14", 8-1/2" x 13", A3, B4:
	30 sheets (21 lbs. (80 g/m2))
Power supply	Drawn from the machine
Weight	Approx. 31.8 lbs. (14.4 kg)
	18-37/64" (W) x 18-5/32" (D) x 7-27/32" (H) (472 mm (W) x 461 mm (D) x 199 mm (H))
Dimensions	(Normal)
	24-3/8" (W) x 18-5/32" (D) x 7-27/32" (H) (619 mm (W) x 461 mm (D) x 199 mm (H))
	(Tray extended)

• As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification

Note changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units and there may be some deviations from these values in individual units.

•Use caution when you turn on the power and when printing is taking place, as the offset tray may move up and down.

140