Sharp TINSE2026QSZZ 136, Removing staple jams, Follow the steps below to remove a staple jam

TROUBLESHOOTING AND MAINTENANCE

Removing staple jams

Follow the steps below to remove a staple jam.

1 Open the cover.	5 Lower the lever at the front end of the
	staple case.

2 While pressing the lever over to the left, slide the finisher to the left until it stops.

Gently slide the finisher until it stops.

6 Replace the staple case.

Push the staple case in until it clicks into place.

3 Lower the staple case release lever and remove the staple case.

Pull the staple case out to the right.

7 Slide the finisher back to the right.

Gently slide the finisher back to the right until it locks into its original position.

4 Raise the lever at the front end of the staple case and remove the jammed staple.

Remove the leading staple if it is bent. If bent staples remain, a staple jam will occur again.

8 Close the cover.

Gently slide the finisher back to the right until it locks into its original position.

Caution

Take care that a bent staple does not hurt you.

136