Sharp TINSE2026QSZZ Executing a JOB Program, Deleting a Stored JOB Program, Press the #/P key

SYSTEM SETTINGS (GENERAL)

EXECUTING A JOB PROGRAM

1 Press the [#/P] key ( ).

LOGOUT

2 Touch the program number key of the desired program.

		The job program will be
JOB PROGRAMS
		executed. A number for
	PRESS PROGRAM NUMBER.	which no job program
		has been stored cannot
		be selected.

3 Place the original, check the original size, and then set the number of copies and any other desired copy settings not stored in the program. When finished, press the [START] key ( ).

LOGOUT

UT

RECALL

DELETING A STORED JOB PROGRAM

1 Press the [#/P] key ( ).

3 Select the program number of the program to be deleted.

	EXIT If a number key for which
	no job program has been
	stored is selected, the
	proceed to step 4 on the
LOGOUT	previous page (for
	storing a job program).
STORE/DELETE

2 Touch the [STORE/DELETE] key.

4 Touch the [DELETE] key.

NUMBER.

ECALLSTORE/DELETE

A JOB PROGRAM HAS BEEN ALREADY STORED. STORE ANOTHER PROGRAM?

CANCEL DELETE STORE

RECALLSTORE/DELET

The selected program will be deleted and you will return to the screen of step

3.If the [CANCEL] key is touched, you will return to the screen of step 3 without deleting the program.

If you are finished deleting programs, touch the [EXIT] key in the screen of step 3 to exit.

94