Sharp TINSE2026QSZZ operation manual Programs for Print Mode, Print Settings, 111

PROGRAMS FOR PRINT MODE

This chapter explains administrator settings that are used for the printer function. These programs can only be configured on models that have the printer function.

PRINT SETTINGS

SYSTEM SETTINGS
PRINT SETTINGS			OK
	DEFAULT SETTINGS	INTERFACE SETTINGS

NETWORK SETTINGS	INITIALIZE AND/OR STORE
	SETTINGS

DEFAULT SETTINGS

These programs allow you to change certain default settings for the printer function.

The "DEFAULT SETTINGS" consist of the following programs:

●PROHIBIT NOTICE PAGE PRINTING

●PRINT DENSITY LEVEL

●PROHIBIT TEST PAGE PRINTING

●ROTATED PRINT

●FORCED OUTPUT OF PRINT

●EXCLUDE BYPASS-TRAY FROM ATS

●DISABLE DEFAULT SETTING CHANGES

FORCED OUTPUT OF PRINT

This program is used to enable or disable automatic printing on a different size of paper when no paper trays have the selected size of paper.

This program is initially disabled (factory default setting).

EXCLUDE BYPASS-TRAY FROM ATS

This program is used to exclude paper in the bypass tray when automatic paper selection is used.

This program is initially enabled (factory default setting).

DISABLE DEFAULT SETTING CHANGES

(When the PRINTER EXPANSION KIT is installed)

This program is used to prevent the configuration setting defaults from being changed.

This program is initially disabled (factory default setting).

PROHIBIT NOTICE PAGE PRINTING

This program is used to prohibit the printing of notice
pages. For an explanation of notice pages, see "If a
Notice Page is printed" in the online manual for printer.
This program is initially disabled (factory default	6
setting).
PRINT DENSITY LEVEL

The print density can be set to one of five different levels. [1] is the lightest level and [5] is the darkest level.

The factory default setting is "3".

PROHIBIT TEST PAGE PRINTING (When the PRINTER EXPANSION KIT is installed)

This program is used to prohibit the printing of test pages.

When the program is enabled, a test page cannot be printed from the system settings (general).

This program is initially disabled (factory default setting).

ROTATED PRINT

This program is used to enable or disable rotation of the print image when an A4R, B5R, or 8-1/2 x 11R (Letter R) document is being printed but there is no paper loaded in that orientation.

This program is initially enabled (factory default setting).

111