Sharp TINSE2026QSZZ Exposure Adjustment, Touch the Exposure key Manually adjust the copy exposure

EXPOSURE ADJUSTMENT

SELECTING THE ORIGINAL IMAGE TYPE AND MANUALLY ADJUSTING THE EXPOSURE

[AUTO] is selected by default for automatic adjustment of the exposure according to the original. If you wish to specify the original image type or manually adjust the exposure, place the original in the RSPF or on the document glass, check the paper size, and then perform the following steps.

1 Touch the [EXPOSURE] key.

3 Manually adjust the copy exposure.

0

AUTO

EXPOSURE

AUTO 8½x11

AUTO MANUAL

1 3 5

If [TEXT] was selected for the original image type, touch the [AUTO MANUAL] key to select [MANUAL] and then adjust the copy exposure.

2 Select [TEXT], [TEXT/PHOTO], or [PHOTO] as appropriate for the original.

ORIGINAL IMAGE TYPE

TEXTAUTO

TEXT/PHOTO

1 3

PHOTO

Selecting the original image type

• Three original image type selections are available.

TEXT	Use for regular text, blueprints,
	and light pencil writing.
TEXT/PHOTO	Use for mixed text/photo originals
	and printed photos.
PHOTO	Use for photos and when you
	desire clearer halftones.

Touch the key to make darker copies.

Touch the key to make lighter copies.

Exposure value guidelines

Note 1 - 2 Dark originals like newspapers

3Normal originals

4- 5 Light colored text or text written in pencil

To change back to automatic exposure adjustment, follow these steps:

1Touch the [EXPOSURE] key.

2Touch the [TEXT] key.

The [AUTO MANUAL] key appears when [TEXT] is selected.

3Touch the [AUTO MANUAL] key so that [AUTO] is highlighted.

4Touch the [OK] key.

4 Touch the [OK] key.

You will return to the main screen of copy mode.

•Automatic exposure adjustment can only be selected when [TEXT] is selected for the original image type.

5 Check the paper size, select the number of copies and any other desired copy settings, and then press the [START] key ( ).

LOGOUT

UT

30