Sharp TINSE2026QSZZ operation manual Programs for Network Scanner Mode, Scanner Settings, 115

PROGRAMS FOR NETWORK SCANNER MODE

This chapter explains administrator settings that are used for the network scanner function. These programs can only be configured on models that have the network scanner function.

SCANNER SETTINGS

SYSTEM SETTINGS
SCANNER SETTINGS	OK

THE NUMBER OF DIRECT ADDRESS / SENDER KEYS DISPLAYED SETTING

This program is used to select the number of one-touch keys that are displayed in the address book

INITIAL FILE FORMAT SETTING

INITIAL QUALITY SETTING

INITIAL RESOLUTION SETTING

1/2

screen and sender selection screen. Selections are [6], [8], and [12].

The factory default setting is "8" (keys).

The "SCANNER SETTINGS" consist of the following programs:

●INITIAL FILE FORMAT SETTING

●INITIAL QUALITY SETTING

●INITIAL RESOLUTION SETTING

●DEFAULT DISPLAY SETTINGS

●THE NUMBER OF DIRECT ADDRESS / SENDER KEYS DISPLAYED SETTING

Each displayed one-touch key name can be Note up to 18 characters long when the number

of displayed one-touch keys is 6 or 8. Each name can only be 10 characters long when the number of displayed one-touch keys is 12.

INITIAL FILE FORMAT SETTING

Use this program to change the default file format (file
type, compression mode, and number of pages per
file) that is used when sending an image by Scan to
E-mail, Scan to Desktop, or Scan to FTP.
The factory default settings are as follows:
• File type: TIFF
• Compression mode: G4	6
• Number of pages per file: All
INITIAL QUALITY SETTING

This program is used to set the default original type and exposure level for network scanner mode.

For information on these settings, see "4. NETWORK SCANNER FUNCTION".

The factory default settings are as follows:

• Original image type: Text/Photo

• Exposure: Auto

INITIAL RESOLUTION SETTING

This program is used to set the default resolution for network scanner mode.

The factory default setting is "300" (dpi).

DEFAULT DISPLAY SETTINGS

Use this program to select the initial screen that appears when the [SCAN] key is pressed to switch to network scanner mode, or when the [CLEAR ALL] key ( ) is pressed in scanner mode.

Three selections are available for the initial screen:

• CONDITION SETTINGS

• ADDRESS BOOK (ABC)

• ADDRESS BOOK (GROUP)

The factory default setting is "CONDITION SETTINGS".

115