Toshiba TF 461 The following functions are available:, Function no.

48
GB TF 461TOSHIBA
Advanced settings
The following functions are
available:
Description
Error correction (ECM) is as follows:
ON: Activated
OFF: Deactivated
Transmission report is produced:
ON: After every transmission
OFF: Only when a transmission
error occurs
ON: Is transmitted
OFF: Is not transmitted
ON: Is printed
OFF: Is not printed
Preset transmission speeds, transmission
9600 BPS 4800 BPS
7200 BPS 2400 BPS
Preset transmission speed, reception
9600 BPS
4800 BPS
Session is possible:
ON: always
OFF: not allowed
A additional password can be stored to
have better security.
DTMF
PULSE DIALLING
Number of redial attempts if transmission
is not successful
02 2 twice
~
10 10 times
Period between redial attempts if
transmission is not successful
30 SEC 30 seconds
~
1 MIN
2 MIN
3 MIN
10 MIN
20 MIN 20 minutes
Period between redial attempts if line is
busy
1 MIN 1 minute
~
10 MIN 10 minutes
Type of connection at start of dialling
procedure
PUBLIC LINE Dialtone is
checked
EXTENSION Dialling procedure
starts after 3 sec.
delay
DIAL AFTER 4.0 SEC Dialling procedure
starts after 4 sec.
delay
~
DIAL AFTER 6.0 SEC Dialling procedure
starts after 6 sec.
delay
Function no.
01
02
04
05
06
07
13
14
20
21
22
23
25
Function
ECM
TRANSMISSION REPORT
HEADER PRINT
RECEIVE FOOTER
XMT SPEED
RCV SPEED
RDC ACCEPTANCE
RDC CENTER ID
DIAL METHOD
REDIAL TIMES
REDIAL INT.
TRAIN INT.
INIT WAIT
Advanced settings