JVC LVT0954-007A manual Basic Procedure, Setting menu

Using the setting menu, you can store the initial selection for audio languages (sound) and subtitle languages for DVD playback as well as other settings.

Setting menu

• LANGUAGE menu (see page 57)

MENU LANGUAGE		ENGLISH
AUDIO LANGUAGE		ENGLISH
SUBTITLE
		ENGLISH
ON SCREEN LANGUAGE
		ENGLISH
			EXIT	Usable
	PRESS KEY

buttons

• AUDIO menu (see page 57)

DIGITAL AUDIO OUTPUT		STREAM/PCM
DOWN MIX		Lo / Ro
COMPRESSION
		ON
			EXIT
	PRESS KEY

• DISPLAY menu (see page 58)

MONITOR TYPE		4:3 LB
SCREEN SAVER		MODE 2
ON SCREEN GUIDE		ON
		EXIT
PRESS	KEY

• SYSTEM menu (see page 58)

RESUME		OFF
AV COMPULINK MODE		DVD 1
		EXIT
PRESS	KEY

Basic Procedure

The setting menu appears only when the selected source is the DVD player and the disc is not played back.

•When an Audio CD or MP3 disc is loaded, you cannot show the setting menu.

On the remote control ONLY:

1 Press CHOICE while holding down SHIFT.

The LANGUAGE menu appears on the TV.

2 Press Cursor 3/2 to move to the menu you want—LANGUAGE, AUDIO, DISPLAY, or

SYSTEM.

MENU LANGUAGE		ENGLISH
AUDIO LANGUAGE		ENGLISH
SUBTITLE
		ENGLISH
ON SCREEN LANGUAGE
		ENGLISH
			EXIT
	PRESS KEY

Ex.: When selecting LANGUAGE menu.

3 Press Cursor ∞/5 to move to an item you want to set.

A selected item shows in green.

MENU LANGUAGE		ENGLISH
AUDIO LANGUAGE		ENGLISH
SUBTITLE
		ENGLISH
ON SCREEN LANGUAGE
		ENGLISH
			EXIT
	PRESS KEY

Ex.: When selecting “MENU LANGUAGE.”

4 Press Cursor 3/2 to select a proper setting you want.

5 To set other items on the same menu, repeat steps 3 and 4.

To set other items on the different menus, repeat steps 2 to 4.

6 When finished, press Cursor ∞ to move		to
	“EXIT,” then press ENTER.
	The setting menu disappears.

To exit from the setting menu any time during the above procedure, press CHOICE while holding down

SHIFT. The setting menu disappears.

The settings you have done up to that time will be stored.

English

56