JVC LVT0954-007A manual Singing Along Karaoke, English, To apply an echo to your voice

Singing Along (Karaoke)

You can enjoy singing along (Karaoke) by using the microphone.

IMPORTANT:

•Always set the MIC VOL control to MIN when connecting or disconnecting the microphone.

•When you do not use the microphone, keep the microphone unconnected.

If howling or squealing (feedback) occurs while using

the microphone, take the following actions to prevent these noises.

•Adjust the MIC VOL and VOLUME controls (or VOLUME + / – on the remote control).

•Avoid pointing the microphone towards the speakers.

1 Rotate the MIC VOL control to MIN.

2 Connect the microphone (not supplied) by plugging it into the MIC jack.

3 Start playing the source—disc, tape or external equipment connected to the AUX/MD jacks.

•When playing a multiplex karaoke disc, you can select the audio channel to play back. (See page 46.)

4 Rotate the MIC VOL and VOLUME controls (or VOLUME + / – on the remote control) as you sing into the microphone.

•By pressing REC, you can record your singing along if you want. (For more details, see pages 51 and 52.)

To apply an echo to your voice

On the remote control ONLY:

Press DIGITAL ECHO so that the ECHO indicator lights up on the display.

ECHO indicator

ECHO 1

V C D

Each time you press the button, the echo level changes as follows:

ECHO LEVEL 1 ECHO LEVEL 2

ECHO LEVEL OFF ECHO LEVEL 3 (Canceled)

•As the number increases, a stronger echo effect applies to your voice.

To adjust the key

You can adjust the key of the sound to fit to your voice.

•This function is available while playing back DVDs, SVCDs, VCDs, or Audio CDs loaded on the DVD player.

On the remote control ONLY:

Press KEY CONTROL # or KEY CONTROL I to adjust the key.

The following display appears.

• You can also check your key adjustment on the TV.

C D

Current setting

You can adjust the key within the range from “–6” to “+6” by 1 step.

To raise the key, press KEY CONTROL #. To lower the key, press KEY CONTROL I.

To cancel the key control, set the key to “0” by pressing KEY CONTROL # or KEY CONTROL I.

When the current title or track finishes playing

The key returns to “0.”

When the 3D PHONIC function (see page 48) is activated

If you set the key to other than “0,” the 3D PHONIC function is temporarily canceled even though the 3D PHONIC indicator lights up. Setting the key back to “0” makes the 3D PHONIC function activated again.

To use the microphone only

Without any background sound, you can use your microphone and record your voice if you want.

1Rotate the MIC VOL control to MIN.

2Connect the microphone.

3Press AUX/MD to select “AUX/MD” as the source.

•If external equipment is connected to the AUX/MD jacks, turn it off.

4Rotate the MIC VOL and VOLUME controls ( or VOLUME + / – on the remote control).

•By pressing REC, you can record your voice if you want. (For more details, see pages 51 and 52.)

English

54