English
Setting the Clock
You can set the clock when the unit is either turned on or in
4 Press ¢ or 4 repeatedly to adjust the minute.
• When you press and hold the button, the minute digit |
changes continuously. |
standby mode.
On the remote control ONLY:
STANDBY/ON
1 | 2 | 3 |
|
|
|
| DISPLAY |
4 | 5 | 6 |
|
|
|
| CLOCK/TIMER |
7 | 8 | 9 |
|
|
|
| A.P. |
|
|
| SLEEP OFF |
10 | 0 | +10 |
|
ON SCREEN | PLAY MODE | REV. MODE | DVD |
ZOOM | DIGEST | COLOR LEVEL | |
AUDIO | SUB TITLE | ANGLE | DIMMER |
| |||
TOP MENU |
| MENU CHOICE | |
SET | ENTER |
| |
SET |
|
| CANCEL |
DVD | TAPE | FM/AM AUX/MD | |
SELECT | |||
STROBE |
|
| RETURN |
PREV. | NEXT | SLOW – | SLOW + |
GROUP SKIP | |||
KEY | DIGITAL | 3D PHONIC | AHB PRO |
CONTROL | ECHO |
DISPLAY
CLOCK/TIMER
CANCEL
PREV. NEXT
GROUP SKIP
• You can also use the number buttons. |
– To adjust the minute to 5, press 5. |
– To adjust the minute to 25, press +10, +10, then 5. |
– To adjust the minute to 30, press +10, +10, then 10 |
(or press +10 three times, then 0). |
5 Press SET to finish setting the clock.
The
To adjust the clock again
Once you have adjusted the clock, you need to press CLOCK/TIMER repeatedly until the clock setting screen appears in the main display (the hour digit starts flashing).
When you unplug the AC power cord or if a power failure occurs
1 Press CLOCK/TIMER.
“0:00” appears in the main display with the hour digit flashing.
2 Press ¢ or 4 repeatedly to adjust the hour.
•When you press and hold the button, the hour digit changes continuously.
•You can also use the number buttons.
–To adjust the hour to 5, press 5.
–To adjust the hour to 12, press +10, then 2.
–To adjust the hour to 20, press +10, then 10 (or press +10 twice, then 0).
3 Press SET to set the hour.
The minute digit starts flashing.
•If you want to change the hour again, press
CANCEL.
The hour digit starts flashing again.
The clock loses its setting and resets to “0:00.” If this happens, set the clock again.
To turn off the clock indication
On the remote control ONLY:
Press DISPLAY while the unit is in standby mode.
“DISPLAY OFF” appears in the main display and the clock indication goes off.
To turn on the clock indication, press DISPLAY again while the unit is in standby mode.
“DISPLAY ON” appears in the main display.
To show the clock when the unit is turned on
On the remote control ONLY:
Press DISPLAY.
The clock indication appears in the main display.
To return to the normal display, press DISPLAY again.
17