To remove the speaker grilles
The speaker grilles are removable as illustrated below:
Projections Holes
Connecting a TV
Connect your TV and this unit using the composite video cord (supplied) or an
•DVDs are protected by the copyguard system. Connecting to a TV through a VCR (or to a TV with a
•You can also use JVC’s AV COMPU LINK control system. (See page 65.)
English
Speaker grille
To remove the speaker grille, insert your fingers at the top of the speaker grille, then pull towards you. Also pull the bottom towards you.
VIDEO OUT
SELECT
PAL NTSC
VIDEO OUT
VIDEO
AUDIO
DVD OPTICAL PCM/
DIGITAL STREAM OUT
/ MD
RIGHT LEFT
To attach the speaker grille, follow the illustration above.
Caution on installation
This unit is compact but high powered, so it has a built- in cooling fan which operates when the internal heat rises due to continuous use and/or high volume level. If you want to place speakers or any equipment on the sides of the unit, leave a space of at least 1 cm between the main unit and each other unit to obtain sufficient cooling effect.
VIDEO OUT
SELECT switch
Video cord | |
(not supplied) | (supplied) |
*Using an
To | To video input |
TV
To select the color system
This unit is compatible with the PAL and NTSC systems. Set the VIDEO OUT SELECT switch on the rear panel while in standby mode to match the color system of your TV. Make sure that the color system marked on the package of a DVD, SVCD, or VCD matches that of your TV.
VIDEO OUT
SELECT
PAL NTSC
Before playing back a disc, select the correct “MONITOR TYPE” in the DISPLAY menu according to the aspect ratio of your TV. See “To select the monitor type” on page 15.
10