12
GB TF 461TOSHIBA
Installation
Connection to PABX,obtaining a public line
The TF 461 can be connected not only to
the public switched telephone network
(public line) but also to a PABX. In this
case, additional parameters have to be
entered.
With PABXs, the public line is obtained in
various ways:
• Number Dial one digit (or several
digits) in order to obtain
the public line
•Earth key Earth potential is
connected to the voice
wire(s) in order to obtain
the public line
• Flash key With this method of
obtaining the public line,
the connection circuit is
interrupted briefly.
With this method of obtaining the public
line, the connection circuit is interrupted
briefly.
When the method of obtaining a
public line has been entered,
you must always press the key
”R” before the actual number when you
dial your fax partner. This is also
applicable for saving the fax numbers
(see page 38).
If you have problems if your
machine is connected to an
extension, please read the
“Comments concerning connection to
PABXs” under “Further settings” (page 61)
15-03 19:56 M 100%

PROGRAM S ETUP DATA

PARAMETER NUMBER =

ACCESS OFF

REGISTER RECALL

FUNCTION
START
REDIAL
PAUSE
START

STOP

2 x
START
Standby mode
Start the menu

Confirm with START (2x)

Make your selection

Enter function number

Confirm with START
Set public line
Page through the menu...
Flash function
Earth key function
Code
...until you reach the desired menu item
Confirm with START

Press STOP, return to standby

mode

Installation