Reception of documents
Set call counter
If your fax machine is set to automatic reception (FAX, TEL/FAX, see page 19), it will switch on as soon as it is called. Under these circumstances, it is thus not possible for the call to be intercepted by the telephone.
However, it is possible for your fax machine to be set in such a way that - in the event of a telephone call - it is activated after a specific delay. The call counter is used for this purpose. You can use this facility to set the number of incoming calls (max. 10) before the fax machine connects to the line.
PROGRAM SETUP DATA
2 x
START
PARAMETER NUMBER =
| START |
|
| AUTO DELAY | 01 |
R | REDIAL | |
| / |
|
| PAUSE | |
| AUTO DELAY | XX |
START
STOP
Standby mode
Start the menu
Confirm with START (2x)
Make your selection
Enter function number
Confirm with START
Set number of rings
Page through the menu...
...until you reach the desired value
Confirm with START
Press STOP, return to standby mode
Memory reception
Under certain circumstances, the machine cannot print out any further incoming copies:
•If there is no recording paper
•If there is a paper jam
In order to prevent problems with reception, the remaining pages are buffered in the memory of your fax machine. Once the problem has been solved, the document is printed out automatically.
Do not switch off the power supply as otherwise the contents of the memory will be lost.
PAPER ERROR M86% | No paper, memory full |
LED "ERROR" is blinking
Paper out
Press STOP
STOP
Incoming copy is printed out
TF 461 TOSHIBA | Reception of documents 21 GB |
