Advanced settings
Set transmission report output
This report can be printed after every transmission or only for errored transmissions. It provides information concerning the most important transmission data.
15-03 19:56 M 100%
FUNCTION
2 x
START
Standby mode
Start the menu
Confirm with START (2x)
PARAMETER NUMBER =
START CONFIRMATION ON
REDIAL
PAUSE
START
STOP
Make your selection for the function number
Enter function number
Confirm with START
Current status
Change the status as follows
ON | Transmission reported printed |
| after every transmission |
OFF | Transmission report printed only |
| for errored transmissions |
Confirm with START
Press STOP, return to standby mode
GB 54 Advanced settings | TOSHIBA TF 461 |
