Your TF 461 as a printer
•Accept the current setting (parallel cable) and click on OK.
Your are now able to check whether your TF 461 has been correctly connected by means of a test printout. If you do not require a test printout, select ”Skip”.
A sample document can only be printed with a color cartridge! Select ”Skip” if a color cartridge has not been installed.
The system starts to copy the printer driver
•To select Express, use the mouse to fill the field ( ).
•Then click on OK.
Information
Default Printer Port Selection
Select the PC output port where your printer is connected.
This utility will use the selected port to communicate with your printer, as well as to update your applications when drivers are installed.
Choose OK to continue after selection, or choose RETURN to return to the previous screen.
Port
Parallel Cable (LPT1)
Serial Cable (COM1)
Serial Cable (COM2)
| OK |
|
| RETURN |
F1 Help AltF4 Exit | F10 Menu Bar | |||
Information
Printing a Sample Document
Let’s see if your printer is properly connected to your computer.
First, be sure your printer is turned on.
Then, choose OK and a sample document will be sent to your printer.
Default Port: LPT1
| OK |
|
| SKIP |
F1 Help AltF4 Exit | F10 Menu Bar | |||
Information
Choosing Setup Method
You are now ready to choose between two methods of setup: Express and Custom. ‘Express’ is the quickest and easiest method. ‘Custom’ offers more flexibility if you have special requirements. If you want to choose how your system is set up, you should select the ‘Custom’ method.
Choose a setup method from the menu below.
If you need help deciding which method to choose, press F1.
Methods
(")Express ( ) Custom
OK
RETURN
F1 Help | AltF4 Exit | F10 Menu Bar |
TF 461 TOSHIBA | Your TF 461 as a printer 65 GB |
