Your TF 461 as a printer
Then click on OK
To install from the DOS level
•Now insert the SETUP DISK in the floppy disk drive of your computer.
•Enter the letter of the drive in which the disk has now been inserted (e.g. drive A).
The DOS prompt is now displayed on the screen:
• Enter SETUP:
The installation program is started:
If you require further information, you can obtain an additional HELP text at any time by pressing the F1 key; this will assist you in any situation. The green fields are buttons; use the mouse to click on these buttons. If you do not have a mouse, you can also activate these buttons by means of a combination of the ALT key and the letter which is highlighted in yellow.
•Click on OK or, if you do not have a mouse, press
a:↵
A:\>_
setup ↵
Information
Printer Setup Utility
Welcome to the Printer Setup Utility.
This utility will:
-check that your printer is properly connected to your computer
-install printer drivers
-install the Printer Toolkit
-complete the setup of your printer’s options
Choose OK to continue. Choose TUTORIAL to begin with some instructions on how to use this utility.
To choose a button if you don’t have a mouse, press and hold the Alt key while you type the highlighted letter ( O or T ).
OK
TUTORIAL
F1 Help AltF4 Exit | F10 Menu Bar |
GB 64 Your TF 461 as a printer | TOSHIBA TF 461 |
