Configuration of the printer
Hex dump mode
This function is only meaningful if you wish to adapt a DOS driver. The data which are sent to the printer are normally interpreted as equivalent characters by the printer. If you wish to identify the specific data which are being sent to your printer, you can switch over the mode of the printer. The data are now no longer interpreted, and are printed instead in the form of hexadecimal characters.
The Hex dump mode is
deactivated as soon as a list is printed, a copy is made or a fax
message is received.
FUNCTION
PROGRAM SETUP DATA REDIAL
3x
PAUSE
PRINTER SETUP
START
REDIAL
4x
PAUSE
SET HEX DUMP MODE
START
15-03 19:56 M 100%
To start the menu
Page through the menu...
...until you reach the desired menu item
Confirm with START
Page through the menu...
...until you reach the desired menu item
Confirm with START
Ready
The printer remains in the Hex dump mode until you...
press STOP to return to the standby mode
STOP
15-03 19:56 M 100%
TF 461 TOSHIBA | Configuration of the printer | 85 GB |
