Installation
Enter the user name
The transmission header not only contains the terminal ID but also the user name. This can contain up to 20 characters. Each digit features several characters which can be activated by repeatedly pressing the corresponding key. If you have found a character of your choice, press the „#“ key to got to the next position. Use the „*“ key to got back one letter and make any corrections. Use the „0“ key to select special characters.
If you enter too many characters, press the CANCEL key to delete the unwanted characters.
When the name is complete, press the START key.
Example: TOSHIBA
PROGRAM SETUP DATA
START
REDIAL
6 x
PAUSE
LOCAL NAME
START
NAME:
NAME: TOSHIBA
START
STOP
Standby mode
Start the menu
Confirm with START
Page through the menu...
...until this menu item appears
Confirm with START
Make your selection
Enter the name Example: TOSHIBA
1 x 8 = T # 3 x 4 = I # 3 x 6 = O # 2 x 2 = B # 4 x 7 = S # 1 x 2 = A 2 x 4 = H #
Name is complete
Confirm with START
Press STOP, return to standby mode
GB 10 Installation | TOSHIBA TF 461 |
