Chapter 10 Network Projector [Windows Vista]
Use of "Connect to a Network Projector"
This projector corresponds to "Connect to a Network Projector" *1 function that is the standard equipment for Windows Vista*2. You can project the computer screen via a network without any software by using this function.
1 Select "Network" from the input menu of the projector.
2 Open the Connect to a Network Projector dialog by clicking the Start button, clicking All Programs, clicking Accessories, and then clicking Connect to a Network Projector. Then, click Search for a projector (recommended).
3 A list of available projectors appears. Select the desired projector and click Connect button. If access to the selected projector is protected by a network PIN code, the password input column appears. Enter a network PIN code and then click Connect button.
Not set the network
PIN code
Set the network
PIN code
This is displayed when you select the projector which is protected by a network PIN code.
Note:
Search for a projector (recommended) wizard cannot find a projector if the projector and your computer are in the different network segment that is separated by the router. Select "Enter the projector address", and enter the network address of the projector to connect.
Refer to the following page for details.
