Configuring wireless LAN setting and security setting
Configuring wireless LAN setting and security setting
Configure the wireless LAN setting and security setting for Wireless 4 and Wireless 5.
Configuring wireless LAN setting
1.Click page [2] of setting pages. Following wireless LAN setting can be done. After completing the configuration, press Set button.
Item | Description |
|
|
Wireless Mode | Select the Communication standard 802.11b or 802.11b/g/n. |
Network Type | Select either “Infrastructure” or “AdHoc”. When selecting the "AdHoc", the security |
| |
SSID/ESSID | Set the SSID/ESSID. (up to ASCII 32 characters) |
| SSID/ESSID is |
| information is uppercase, it is necessary to distinguish between upper case and |
| lower case characters. |
Channel | If you use the projector in 802.11AdHoc mode, select the channel, from 1 to 11. |
Notes for entering characters:
The “¥” symbol is displayed as “\” when the ASCII key is used. The “]” symbol is treated as a character by the ASCII key, but it is not interpreted as a character by the HEX key. In HEX, the “]” symbol is displayed in red and setting is denied.
You can not set all the characters with the “]” symbol. It will be considered as no operation. ASCII key characters : Space - 0 to 9 A to Z a to z ! " # $ % & ' ( ) * + , . / : ; < = > ? @ [ ¥ ] ^ _ ` { } ~ HEX key characters : 0 to 9 a to f
55
