SNMP setting

Trap option

Trap option setting

Tick the check boxes in front of the condition item to send the trap.

Click Set button if you tick or un-tick the check box on a page.

[1]––––––––––––––––––––––––––––––––––

oWhen PJ lamp is off.

oWhen PJ lamp replacement time is reached.

oWhen internal PJ power circuit is failed.

oWhen internal PJ temperature is too high.

[2]––––––––––––––––––––––––––––––––––

oWhen PJ is turned into Standby in proper user operation.

oWhen accumulated filter use time

reaches [ ] hours.

oWhen Power management function turns PJ lamp off.

[3]––––––––––––––––––––––––––––––––––

oWhen the signal is interrupted.

oWhen Auto Play is failed.

oWhen lamp Corres. Value

reaches [ ] hours.

"When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned into standby with ON/ STANDBY button on the top control or the remote control.

Up to 99,999 hours can be set for the time setting.

If condition "When Auto Play is failed" is checked, the trap is sent when the error occurs during the auto display operation using with the network viewer function (+p.113). For further information of the error, refer to item "Auto Display setting and control page [3]"((+p.127).

63

Page 63
Image 63
Sanyo 1AV4U19B25500 owner manual Trap option setting