RedMax BCZ2610S-CA, BCZ2610SU-CA, BCZ2610SW-CA manual Set up

English

6. Set up

SE1

[BCZ2610S]

(1) [BCZ2610SU] [BCZ2610S-CA] [BCZ2610SU-CA]

[BCZ2610SW] [BCZ2610SW-CA]

SE2

SE3

SE4

■INSTALLING HANDLE

•Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. (SE1)

(1)About 19 inches (48cm)

(2)About 14.5 inches (37cm)

■INSTALLING DEBRIS GUARD

•Put the debris guard on the gear box, attach it with the screws and hardware provided. (SE2)

■INSTALLING CUTTING HEAD (SE3)

1.While locking the gear shaft, by inserting the supplied tool into the upper holder on the gear box, loosen and remove the hexagon nut(left-handed)

2.Fit the line head assembly to the gear shaft over the holders. Hand-tighten it securely.

IMPORTANT

You need not holder (B) and nut when installing the cutting head.

■BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Slide clamp up or down until unit balances with head just touching on the ground. (SE4)

18