English
8. Operation
F6
F7
F8 | (3) |
(1)
(2)
F9
■STARTING ENGINE
IMPORTANT
•Avoid operating the blower with the flexible tube and swivel joint disconnected. That will reduce the cooling air and the engine could be damaged by overheating.
1.Push the primer bulb until fuel flows out in the clear tube. (F6)
(1) Primer Bulb
2. When the engine is cool, close the choke. (F7)
(1)Choke Lever
(2)CLOSE
(3)OPEN
3.Set the ignition switch to the start position. (F8)
4.Set the throttle lever in idling position. (F8)
(1)Full Throttle
(2)Idling
(3)Ignition Switch
5.To start, hold the top of the blower firmly and hold the flame by your foot. Pull the starter knob slowly until you feel it engage and then give it a vigorous strong pull. (F9)
IMPORTANT
•Avoid pulling the starter rope out to its full extent and allowing the starter rope to snap back. This will prevent premature damage to the starter.
•Do not let a person stand near the blower or the exhaust port.
•Never to touch the muffler, spark plug, other metallic parts of the engine or engine cover while the engine is in operation or immediately after shutting down the engine. These metallic
30
