OPT5

OPT6

English

11. Optional vacuum kit usage

4)Installing Elbow and Dust Bag (OPT5,6)

1.Open the fastener of the dust bag.

2.Insert the elbow convex groove into the dust bag elbow opening.

Continue to push the elbow convex groove until the convex hits against the dust bag opening. Close the dust bag fastener.

3.Fit the elbow groove with discharge port projection, turn the elbow and mount the dust bag to the main unit.

(6)Convex Groove

(7)Convex End

(8)Groove

DUST COLLECTING OPERATION

Put the dust bag belt on the shoulder, and adjust the length of the belt so as to permit easy operation.

Confirm that the dust bag is not twisted, pull the throttle trigger, and start dust collecting operation.

Detach the dust bag from the main unit when it is full of dust, open the dust bag fastener, and dispose of dust.

WARNING

Never suck in any liquid or lit cigarette.

• It will lead to an electric shock or burn.

NOTE

Never suck in large wood chips, metal, glass, small stones or other foreign materials.

A filled dust bag will lessen dust-collecting capacity. It is advisable to discharge dust before it becomes too much.

(A)Indicates Warning, Danger, and Caution.

(B)Keep work area clear of other per-sons and pets.

(C)Risk of long hair being drawn into air inlet.

(D)Wear head, eye, and hearing protection when operating this equipment.

(E)Do not run unit while vacuum door is unsecured.

40

Page 40
Image 40
RedMax HBZ2601 manual OPT5 OPT6, Installing Elbow and Dust Bag OPT5,6, Convex Groove Convex End, Dust Collecting Operation