9.With an isolating valve connected, flush the pipework through to remove particles etc. before making the final connection to the shower. A blockage in the waterways
(particularly the spray rings and filter) will prevent the shower unit working properly.
10.The shower unit should only be used with "Redring" recommended fittings.
Mains Supply
Dedicated cold supply taken below cold
Isolating Valvewater feed to hot water cylinder Cold water cistern
Diagram 10
| Top entry | |
| cylinder flange | |
Isolating Valve | (Surrey flange) | |
Hot supply | ||
|
8cm min, 10m max recommended heights between bottom of cold water cistern and top of shower unit
Isolating valves
Side entry cylinder flange 
(Essex flange)
Hot Water Cylinder | Other |
|
Redring shower
unit and accessories
Drain Valve
Mains Supply
Isolating Valve
Cold water cistern
Isolating Valve | Hot supply |
Dedicated cold supply taken below cold water feed to hot water cylinder
8cm min, 10m max recommended heights between bottom of cold water cistern and top of shower unit
Isolating valves
Diagram 11
Hot Water Cylinder | Other |
|
Redring shower
unit and accessories
Drain Valve
8
