4. Identify the Left and Right Base Covers (73, 74), | 4 |
|
|
which are marked either “Left” and “Right” or “L” |
|
| |
|
|
| |
and “R.” Slide the Left and Right Base Covers |
|
|
|
onto the Left and Right Uprights (75, 76) as |
|
|
|
shown. |
|
|
|
Remove the wire tie from the Upright Wire (70). |
|
| 76 |
|
| 70 | 74 |
|
| Wire | |
|
|
| |
| 75 | Tie |
|
|
|
| |
| 73 |
|
|
5. Identify the left handrail assembly (A), which | 5 |
|
|
is marked “Left.” If there is a wire in the left | 10 |
| |
|
| ||
Handrail (71), remove and discard it. |
|
|
|
Hold the left handrail assembly (A) near the Left |
| 70 |
|
Upright (75). Insert the wire tie on the Upright |
| 8 |
|
Wire (70) into the bottom and out of the end of |
|
| |
the left Handrail (71) as shown. Then, pull the |
| B |
|
Upright Wire through the left Handrail. |
|
| A |
Attach the left handrail assembly (A) to the Left | Wire |
| |
71 |
| ||
Upright (75) with two 5/16" x 2 3/4" Screws (10) | Tie |
|
|
and two 5/16" Star Washers (8). Make sure not |
|
|
|
to pinch the Upright Wire (70). Do not tighten |
|
|
|
the Screws yet. |
|
|
|
Remove and discard the two indicated screws |
| 75 |
|
|
|
| |
(B) from the left Handrail (71). |
|
|
|
Attach the right handrail assembly to the |
|
|
|
Right Upright (not shown) as described |
|
|
|
above. Note: There are no wires in the Right |
|
|
|
Upright. |
|
|
|
| 9 |
|
|
