6.Set the Console Base (83) face down on a soft surface to avoid scratching the Console Base.
Remove the two screws (C) from the Pulse Crossbar (31). Remove the Pulse Crossbar and discard the screws.
Remove the four 5/16" x 5/8" Screws (7) from the Console Frame (87). The Screws will be used in a later step.
7.Identify the Left and Right Trays (92, 93), which are marked “Left” and “Right.”
Attach the Left and Right Trays (92, 93) to the Console Base (83) with eight #8 x 1/2" Screws
(9). Tip: It may be easier to start the two inside Screws and then slide the Trays into place before starting the other six Screws.
Note: It may be necessary to rotate the Console Frame (87) upward when attaching the Trays (92, 93).
46 | 7 |
|
|
|
|
| |
|
| 87 |
|
|
| 83 |
|
|
| C |
|
|
| 7 |
|
| 31 |
|
|
7 |
|
|
|
| 93 | 87 |
|
| 9 | 9 |
|
|
| 92 | 9 |
|
| 83 |
|
|
| 9 |
|
|
| 9 |
|
10
