Reebok Fitness RBCCEL79021 manual Assembly

ASSEMBLY

Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of
the packing materials until assembly is completed.		and a rubber
In addition to the included tools, assembly requires an adjustable wrench
mallet	.

Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 25. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M6 Split Washer	Small M8	M10 Split		Wave Washer	Large M8
(72)–2	Washer (71)–2	Washer (103)–4		(101)–2	Washer (70)–2
M10 Nylon	M4 x 16mm	M4 x 19mm		M4 x 25mm	M6 x 20mm Patch
Locknut (85)–4	Screw (82)—6	Screw (92)–2		Screw (96)–2	Screw (75)–4
M6 x 16mm Button	M8 x 19mm Patch		M8 x 25mm Patch		M8 x 19mm Shoulder
Screw (93)–2	Screw (81)–4		Screw (73)–10		Screw (102)–2
			Bolt Set (67)–2

1.Identify the Front Stabilizer (63), which has Wheels (27) attached to one side. Attach the Front Stabilizer to the front of the Frame (1) with four M8 x 25mm Patch Screws (73).

1	73	73
	63	73
27		1
5