Reebok Fitness RBTL12900 manual HOW to Create Custom Programs, Select custom program 1 or

CURRENT PERIOD

HOW TO CREATE CUSTOM PROGRAMS

Custom programs 1 and 2 are workout programs that you create. The programs control both the speed and the incline of the treadmill, and can be up to 40 minutes long. The programs are stored in memory and can be changed as many times as desired.

Follow the steps below to create a custom program.

1Insert the key fully into the console.

See HOW TO TURN ON THE POWER on page 10.

2Select custom program 1 or 2.

When the key is inserted, the manual mode will be selected. To select a cus- tom program, press the MODE button repeatedly until the custom 1 or 2 in- dicator lights.

3to start the program.

A moment after the button is pressed, the walking

belt will begin to move. Hold the handrails and begin walking.Press the START button or the SPEED + button

4	Press the LEARN button and program	the
	desired speed and incline settings.

When the LEARN button is pressed, the LEARN indic- tor will light. Speed and in- cline settings can be pro- grammed only when the indicator is lit.

Each program is divided into one-minute periods. One speed setting and one incline setting can be programmed for each period. The speed setting for the first period is shown in the flashing CURRENT

PERIOD col- umn of the

LED matrix.

(The incline settings are not shown in the matrix.) To program speed and in- cline settings

for the first period, simply adjust the speed and in- cline of the treadmill to the desired levels with the SPEED and INCLINE buttons. Every few times the SPEED buttons are pressed, one additional indica- tor will light or darken in the CURRENT PERIOD column.

When the first one-minute period of the program is completed, a series of tones will sound and the cur- rent speed and incline settings will be stored in memory. All speed settings shown in the LED matrix will then move one column to the left and the speed setting for the second period will be shown in the flashing CURRENT PERIOD column. Program speed and incline settings for the second period as described above. Repeat this procedure until you have programmed speed and incline settings for as many periods as desired. Programs can have up to forty periods.

5then reinsert the key.

When you have programmed speed and incline settings for as many one-minute periods as desired, press the STOP button, remove the key, and then reinsert the key. The speed and incline settings that you have programmed and the length of the program will be stored in memory. To use the

program again, see HOW TO USE CUSTOM PRO- GRAMS on page 14.Press the STOP button, remove the key, and

6Whenkey. the program is completed, remove the

See step 6 on page 11.

13