Reebok Fitness RBTL13990 manual Treadmill Operation, Performant Lubetm Walking Belt

TREADMILL OPERATION

THE PERFORMANT LUBETM WALKING BELT					electric shock. This product is equipped with a cord
					having an equipment-grounding conductor and a
Your treadmill features a walking belt coated with					grounding plug. Plug the power cord into a surge
PERFORMANT LUBETM, a high-performance lubricant.					protector, and plug the surge protector into an ap-
IMPORTANT: Never apply silicone spray or other					propriate outlet that is properly installed and
substances to the walking belt or the walking plat-					grounded in accordance with all local codes and
form. They will deteriorate the walking belt and					ordinances.
cause excessive wear.
					This product is for use on a nominal 120-volt circuit,
HOW TO PLUG IN THE POWER CORD					and has a grounding plug that looks like the plug illus-
					trated in drawing 1 below. A temporary adapter that
					looks like the adapter illustrated in drawing 2 may be
	DANGER: Improper connection
					used to connect the surge protector to a 2-pole recep-
					tacle as shown in drawing 2 if a properly grounded out-
	of the equipment-grounding conductor can
					let is not available.
	result in an increased risk of electric shock.
	Check with a qualified electrician or service-				The temporary adapter should be used only until a
	man if you are in doubt as to whether the
					properly grounded outlet (drawing 1) can be installed
	product is properly grounded. Do not modify
					by a qualified electrician.
	the plug provided with the productÑif it will
	not fit the outlet, have a proper outlet in-				The green-colored rigid ear, lug, or the like extending
	stalled by a qualified electrician.
					from the adapter must be connected to a permanent
					ground such as a properly grounded outlet box cover.
Your treadmill, like any other type of sophisticated					Whenever the adapter is used it must be held in place
					by a metal screw. Some 2-pole receptacle outlet box
electronic equipment, can be seriously damaged by
					covers are not grounded. Contact a qualified elec-
sudden voltage changes in your homeÕs power.
					trician to determine if the outlet box cover is
Voltage surges, spikes, and noise interference can re-
					grounded before using an adapter.
sult from weather conditions or from other appliances
being turned on or off.
To decrease the pos-
sibility of your tread-		1
			Grounded Outlet Box
mill being damaged,
						Treadmill Power Cord
always use a surge
				Grounding Pin
protector (not in-
cluded) with your
					Grounding Plug		Grounding Plug
treadmill.

Surge protectors are		Grounding Pin
sold at most hardware
		Grounded Outlet
stores and department
stores. Use only a UL-
listed surge protector,	2
rated at 15 amps, with a		Grounded Outlet Box
14-gauge cord of five
feet or less in length.		Adapter

This product must be			Grounding Pin
grounded. If it should				Grounding Plug	Surge Protector
malfunction or break
down, grounding pro-
		Lug
vides a path of least re-
sistance for electric cur-	Metal Screw
rent to reduce the risk of

7