4.With the help of a second person, hold the con- sole assembly near the Uprights (73, 74). Connect the Upright Wire (75) to the Console Wire Harness (71). See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one con- nector and try again. IF THE CONNECTORS
ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.
Remove the wire tie from the Upright Wire (75).
5.Insert the brackets on the Handrails (99) into the Uprights (73, 74). Make sure that no wires are pinched.
6.Partially tighten six 3/8" x 1 1/2" Bolts (64) with six 3/8" Star Washers (90) (only three are shown) into the Uprights (73, 74). Then, firmly tighten all six Bolts.
4 | Console |
|
|
| |
| Assembly |
|
|
| |
|
|
| 73 |
|
|
|
|
|
|
| 71 |
|
| 71 |
| Wire | 75 |
| 75 |
| Tie | 74 | |
|
|
|
|
| |
5 |
| 99 |
|
|
|
|
|
|
|
| |
|
| 73 |
|
| 99 |
|
|
|
|
| 74 |
6 |
|
|
|
|
|
| 73 |
|
|
|
|
|
|
|
|
| 64 |
|
|
|
|
| 90 |
|
|
| 64 | 90 | 74 |
|
|
|
| ||
|
|
|
|
| |
8 |
|
|
|
|
|
