5.While pressing down on the Handrails (87), tighten eight Upright Bolts (86) and four 3/8” Star Washers (88) into the Uprights (90, 95) and the Handrail (87) as shown. Be careful to avoid pinching the Upright Wire Harness (108).
Note: The CD Holder (38) and the Cup Holder (43) are replaceable. If these parts become dislodged from the Console Base (80), simply press them back in.
6.Place the treadmill in the storage position (see HOW TO FOLD THE TREADMILL FOR STORAGE on page 22). Center the Frame (16) between the Uprights (90, 95). Then, tighten the Upright Bolts (86) in the lower ends of the Uprights.
5 |
|
38 |
|
80 | |
86 |
|
| 43 |
88 |
|
86 |
|
90 |
|
88 | 86 |
87 | 95 |
6 |
|
16 |
|
| 95 |
90 |
|
| 86 |
| 86 |
7.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place. The large hex key is used to adjust the walking belt (see page 25). To protect the floor or carpet, place a mat under the treadmill.
8
