Regalo Safety Gate installation instructions Important Keep these instructions for future

Models: Safety Gate

1 9
Download 9 pages 24.5 Kb
Page 6
Image 6

Important: Keep these instructions for future

Gate Instructions

reference

 

Step 5.

You are now ready to do the Final Adjustment to fasten your gate firmly in the doorway. Start by turning the BOTTOM Adjustment Wheels FIRST. Continue to turn the lower Adjustment Wheels counter-clockwise until the Adjustment Wheels are firmly against the ends of the frame tubes. . IMPORTANT: There should be equal space on each side of the gate. To easily determine this look at the length of threaded rod is that is showing on each side. If the gate is centered, there will be an equal length of threaded rod showing. If more threaded rod is showing on one side you can adjust this using the Adjustment Wheels. Simply turn the side that has too much Threaded Rod showing clockwise, and then turn the other sidecounter-clockwise. As yousothisyouwillsee thesides equaling out as shown in Diagram E .

Diagram E .

(6)

Page 6
Image 6
Regalo Safety Gate installation instructions Important Keep these instructions for future