MAINTENANCE

DOOR GLASS

REPLACEMENT

Your Regency stove is supplied with high temperature, 5 mm Neoceram ceramic glass that will withstand the highest heat that your unit will produce. In the event that you break your glass by impact, purchase your replacement from an authorized Regency dealer only, and follow our step-by-step instructions for replacement.

Bay Glass Removal

1) Remove the door from the unit and place

on a soft surface to prevent scratching.

2) Remove the nuts holding the glass retainers

REMOVING VALVE

ASSEMBLY

1)Disconnect the power.

2)Shut off the gas.

3)Remove top and bottom louvers.

4)Remove top and bottom trim.

5)Remove glass.

6)Remove log set & embers, and brick panels.

7)Disconnect the gas line.

12)Remove the 2 screws on each side of the fi rebox bottom and 4 screws on the rear wall., and lift out.

 

in place.

3)

Remove the glass retainers (sides, top and

 

bottom).

4)

Replace the glass. The glass must have

 

gasketing around it.

5)

Reverse the previous steps, replace the

 

retainers and fasten with the nuts but do not

 

over tighten, as this can break the glass.

6)

Replace door on the stove and check the

 

seal.

8)Remove wires from valve (top and bottom terminals).

9)Remove the burner tray by removing the 1 screw on each side, then slide the tray to the left and lift out.

13)Remove valve assembly from stove body by removing 3 phillips screws.

14)Remove the valve from the bracket and replace. Reverse steps to install valve.

Flush Glass Replacement

Replace with new fl ush front as on page 13.

Remove 2 screws, then push burner tray to

left and lift out.

10)Remove the 2 screws to the right of the cutout on the fi rebox bottom.

11)Remove the switch cover from the left side of the body base and pull the thermodisc out of the bracket under the left side of the fi rebox bottom.

REMOVING THE FAN

IMPORTANT

Disconnect power supply

before servicing

1)Disconnect the power.

2)Shut off the gas.

3)Remove top and bottom louvers.

4)Remove top and bottom trim.

5)Remove glass.

6)Remove logs, embers, and brick panels.

7)Remove Burner Tray and Firebox bottom - see steps 9) to 12) in "Removing Valve Assembly.

8)Remove wires from fan.

9)Lift fan off of the two pins.

10)Reverse steps to install fan.

Remove the 2 nuts holding the switch box in place, then pull the thermosdisc out of

the bracket.

Regency E21 Gas Fireplace Insert

23

Page 22 Page 24
Page 23
Image 23
Regency E21-NG1, E21-LP1 Door Glass Replacement, Removing Valve Assembly, Removing the FAN, Bay Glass Removal
Page 22 Page 24

E21-NG1, E21-LP1 specifications

The Regency E21-LP1 and E21-NG1 are premium gas fireplaces that embody the essence of modern heating technology while offering unparalleled aesthetic appeal. Designed to meet the demands of today’s homeowners, these models combine efficiency, style, and innovative features to elevate any living space.

One of the standout characteristics of the E21 series is its sleek design, which integrates seamlessly into a variety of home decors. Both the E21-LP1 and E21-NG1 are designed for liquid propane and natural gas respectively, ensuring versatility in fuel options. Their clean lines and minimalist profile make them an attractive focal point, perfect for modern, contemporary, or transitional interiors.

These gas fireplaces feature advanced heating technology, providing robust warmth quickly and efficiently. The E21 models are equipped with an impressive direct vent system that ensures optimal performance while maintaining indoor air quality. This means that the fireplace pulls air from the outside for combustion and vents exhaust back outside, allowing for ventilation without compromising on comfort.

Energy efficiency is a key characteristic of the Regency E21 models. They boast a high efficiency rating, which translates into lower heating costs and reduced environmental impact. The innovative burner design enhances flame presentation, providing a realistic and inviting fire that enhances the ambiance of any room.

Ease of use is also a significant benefit of the E21-LP1 and E21-NG1. With an intuitive control panel, users can easily manage the flame height and adjust the heat output to suit their needs. Many homeowners appreciate the convenience of remote control operation, allowing them to adjust their fireplace settings from the comfort of their seat.

Safety features are paramount in the design of the E21 models. Each fireplace is equipped with standard safety mechanisms, including an automatic shut-off system that activates in the event of a malfunction. This provides peace of mind for users, ensuring that their heating source is both effective and secure.

In summary, the Regency E21-LP1 and E21-NG1 offer a blend of modern design, advanced technology, and high efficiency, making them ideal choices for anyone looking to invest in a reliable and stylish gas fireplace. With an emphasis on user-friendly features and safety, they promise to deliver warmth and comfort for years to come.
Top Page Image Contents