LIGHTS CONTINUOUSLY BLINK ON AND OFF AT NIGHT
The light given off from the unit’s own lamp(s) is affecting the motion sensor.
•
•Reposition motion sensor.
LIGHTS ARE ON DURING THE DAY
Is the switch on the bottom of the motion sensor in the test mode?
•Move the switch to the AUTO or NIGHT TIME ONposition. Is the motion detector shadowed?
•Reposition motion sensor.
CANNOT ACTIVATE DUSK TO DAWN MODE AT NIGHT (OVERRIDE)
Is the surrounding external ambient light too bright? (If so, the unit may think it’s daytime.)
•
•Relocate or reposition the unit a way from the light.
Are you allowing adequate time to enter the dusk to dawn mode?
•Turn the light switch to the OFF position for 5 seconds and then back to the ON position.
Is there more than one fixture on an indoor wall switch?
• If so, put them on separate switches.
LIGHTS DO NOT COME ON | Is the sensor in the correct SETTING? | |
IN NIGHT TIME ON MODE | • | Move slide switch to 2 hr or 4 hr setting. |
|
| |
LIGHTS WILL NOT RESPOND | Was NIGHT TIME ON setting changed after lights were already on | |
TO SELECTED NIGHT TIME ON in a different NIGHT TIME ON setting? | ||
SETTING | • | NIGHT TIME ONmode setting cannot be changed until |
the next dawn once light is operating in that setting. See “How to select your desired feature”.
If lights do not come on at all in NIGHT TIME ONmode:
Is the surrounding external ambient light too bright? (If so, the unit may think it’s daytime.)
•
• Relocate or reposition the unit away from the light.
INDOOR ALARM DOES NOT SOUND
Is the indoor module turned up loud enough?
• Adjust volume slide switch on side of the module.
Is the indoor module set to the same house code as the outdoor sensor?
Have you tried all other house codes?
•Tr y all house codes making sure sensor house code matches indoor module house code .
• Move the module to a different outlet.
INDOOR LAMP DOES NOT TURN ON
Is the switch on the lamp turned on?
Is it night outside?
•The indoor lamp will automatically turn on whenever the outside lights turn on (only at night).
Is the indoor module set to the same house code as the outdoor sensor?
Is the indoor lamp controlled by a wall switch?
• If so, make sure wall switch is turned on.
INDOOR LAMP DOES NOT | Has the lamp been turned on by setting the MODEOFOPERA- |
TURN OFF | TIONto LAMPON? |
| • If so, the lamp will stay on until the slide switch is moved to |
| another mode. |
| Is it night outside? |
| • The indoor lamp will automatically turn on whenever the |
| outside lights turn on (only at night). |
| Is the indoor module set to the same house code as the outdoor |
| sensor? |
Two year limited warranty
Cooper Lighting (“the Company”) warrants this product (“the product”) against defects in material or workmanship for a period of two years from date of original purchase, and agrees to repair or, at the Company’s option, replace a defective product without charge for either replacement parts or labor during such time. This does not include labor to remove or install fixtures.
(continued)
8
