Unload | Remington 491 instruction

Safety Precautions

6.Power fasteners are a permanently installed fixture. An act of demolition is required for their removal. Appropriate safety precautions must be taken.

Head

Shank

Plastic Flute

482-60

7.Never use common nails or other materials as fasteners. Remington Power Fasteners are manufactured from special steel and heat treated to produce a very hard yet ductile fastener.

8.Never pry a power load out of the strip. Prying can discharge the load causing serious injury (See Troubleshooting Guide, page 23).

UNLOAD

1

2

9.If work is interrupted for any reason, remove the power load strip before removing the power fastener.

099494

11

Image 11

Remington 491 operating instructions Unload

Contents

Powder Actuated Tool Remington Index ? ? Handling the Tool Safety Precautions Powd Know Your Fastening Base Material Never make fastenings in spalled or cracked areas Operating the Tool Power Loads and Fasteners GREEN? RED? Unload WHY a Power Fastener Holds Concrete Why a Power Fastener Holds Overdrive Selecting Power Fasteners and Power Loads Operation Water Key Part Description Qty Parts List Cleaning and Maintenance Separating Base Plate From Piston Sleeve Removing Rock ARM Removing Rubber PAD Removing Liner from Tool Body Removing Trigger AssemblyRemoving Firing PIN Attaching Liner to Tool Body Tool AssemblyAttaching Trigger Assembly to Tool Body Attaching Firing PIN Assembly Attaching Rubber PAD Assembling Barrel Assembly Problem Possible Cause Remedy Troubleshooting Guide SP Fasteners Application ChartFasteners Load Color Code Portable Heater Parts Clark Supply Parts Central Maintenance Log Canada, Inc Limited Warranty Agreement