Safety Precautions, Handling the Tool | Remington 491 guide

Safety Precautions

WARNING

POWDER

ACTUATED !

TOOLS

IN USE

482-10

4.Always clear the work area on all sides and post appropriate warning signs on job sites.

482

5.Make sure the work area is clean from loose material and debris.

HANDLING THE TOOL

1.Never place your hand over the muzzle. Accidental discharge can cause serious injury.

2.Never place your finger on the trigger until the tool’s muzzle is against the work surface.

4

099494

Image 4

Remington 491 operating instructions Safety Precautions, Handling the Tool

Contents

Remington Powder Actuated Tool Index ? ? Safety Precautions Handling the Tool Powd Know Your Fastening Base Material Never make fastenings in spalled or cracked areas Operating the Tool Power Loads and Fasteners GREEN? RED? Unload Why a Power Fastener Holds WHY a Power Fastener Holds Concrete Selecting Power Fasteners and Power Loads Overdrive Operation Water Parts List Key Part Description Qty Cleaning and Maintenance Separating Base Plate From Piston Sleeve Removing Rubber PAD Removing Rock ARM Removing Firing PIN Removing Trigger AssemblyRemoving Liner from Tool Body Tool Assembly Attaching Trigger Assembly to Tool BodyAttaching Firing PIN Assembly Attaching Liner to Tool Body Assembling Barrel Assembly Attaching Rubber PAD Troubleshooting Guide Problem Possible Cause Remedy Fasteners Application ChartSP Fasteners Load Color Code Parts Central Portable Heater Parts Clark Supply Maintenance Log Limited Warranty Agreement Canada, Inc