Remington BV12199A Converting from Blower to Vacuum, continued, Blower/Vac Assembly, 118034

6 Chapter 3: Blower/Vac Assembly

Converting from

Blower to Vacuum, continued

3.Connect the lower and upper vacuum tubes together (see Figure 3-6). Align the ridge on the bottom tube with the channel on the top tube. Press together until you hear a “snap”.

4.Connect the tubes to the vacuum tube adapter (see Figure 3-7).Align the tab on the top tube with the notch on the vacuum tube adapter. Press together until you hear a “snap”.

5.Position front of vacuum tube adapter assembly over vacuum bag adapter hook (see Figure 3-8).

6.Pivot vacuum tube adapter assembly to bottom of blower/vac housing. Slightly press locking lever on vacu- um tube adapter to allow adapter to lock into place (see Figures 3-9 and 3-10).

Notch 2

Tab

Figure 3-7: Connecting vacuum tubes to vacuum tube adapter

5

Figure 3-9: Pivoting vacuum tube adapter to blower/vac housing

4

1

Figure 3-8: Attaching vacuum tube adapter to blower tube hook

3

Figure 3-10: Pressing locking lever

Figure 3-6: Conntecting lower and upper vacuum tube together

118034