2 Chapter 1: Important Safety Information

10.Provide Ground Fault Circuit Inter- rupter (GFCI) protection on the circuit or outlet to be used for trim- mer/edger. You may use receptacles with built-in GFCI protection for this safety measure.

WHILE OPERATING

TRIMMER/EDGER

1.Stay alert. Watch what you are doing. Use common sense.

2.Be aware of extension cord while operat- ing trimmer/edger.Be careful not to trip over extension cord.

3.Avoid unintentional starting. Do not carry plugged-in trimmer/edger with finger on switch. Be sure switch is OFF when plugging in trimmer/ edger.

4.Do not overreach. Keep proper foot- ing and balance at all times when operating trimmer/edger.

5.Disconnect the trimmer/edger from the power supply

when not in use

before servicing

6.Do not force trimmer/edger.It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed.

7.Do not abuse power cord. Never pull or carry trimmer/edger by power cord. Never yank cord to disconnect from receptacle. Keep power cord from heat, oil, and sharp edges.

8.Keep hands and feet away from cut- ting area.

MAINTENANCE AND STORAGE OF TRIMMER/ EDGER

1.Maintain trimmer/edger with care.

Inspect trimmer/edger cord pe- riodically, and if damaged, have it repaired by a qualified service facility.

Inspect extension cords periodically and replace if damaged.

If trimmer/edger is not working properly, has been dropped, dam- aged, left outdoors, or dropped into water, have it repaired by a qualified service center.

Keep handles dry, clean, and free from oil and grease.

Keep guards in place and in work- ing order.

2.Check damaged parts.

If a part is damaged, carefully check the damaged part before using the trimmer/edger. Make sure the part will operate properly and perform its intended function.

Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation.

A guard or other part that is dam- aged should be properly repaired or replaced by a qualified service center unless indicated elsewhere in this manual.

Use only geniune Remington® replacement parts and accessories. These are available from your local dealer. Use of any non-Reming- ton® parts or accessories could lead to injury to the user, damage to the unit, and void you warranty.

3.Servicing of Double-Insulated Tools:

In a double-insulated tool, two systems of insulation are provided instead of grounding. No ground- ing means is provided on a double- insulated tool, nor should a means for grounding be added to the tool. Servicing a double-insulated tool requires extreme care and knowl- edge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated tool must be identical to the parts they replace.

4.Store idle trimmer/edger indoors. When not in use,store trimmer/edger and extension cord indoors in a dry location. Store trimmer/edger above the reach of children or in a locked area out of the reach of children.

This manual is your guide to safe and proper operation of the trimmer/edger.

SAVE THESE

INSTRUCTIONS.

118035

Page 6
Image 6
Remington ST3812B, ST4514B Important Safety Information, Stay alert. Watch what you are doing. Use common sense

ST3812B, ST4514B specifications

The Remington ST3812B and ST4514B are two innovative hair styling tools designed to cater to various hair types and styling preferences. These hair straighteners combine advanced technologies to ensure an efficient, safe, and stylish experience for users.

The Remington ST3812B, often celebrated for its compact design, features ceramic plates that provide even heat distribution, minimizing the chances of hot spots that can damage hair. With a fast heat-up time of just 30 seconds, this straightener is perfect for those with busy schedules who need a quick styling solution. The straightener offers multiple temperature settings, allowing users to choose the best heat level for their specific hair type, whether it be fine, thick, or somewhere in between. This feature not only promotes hair health but also enhances styling versatility.

In addition, the ST3812B is equipped with a safety lock feature that secures the plates together for easy storage and transportation. The ergonomic design ensures comfortable handling, making it easier to create those coveted sleek and straight styles without causing unnecessary strain on the wrists.

On the other hand, the Remington ST4514B caters to a broader audience with its larger plates, which are ideal for users with long or thick hair. This model integrates a unique Digital Heat Control technology, enabling precise temperature adjustments based on the specific needs of the hair. With a maximum heat setting of 230 degrees Celsius, the ST4514B is designed to tame even the most unruly locks while ensuring minimal damage.

Additionally, the ST4514B features a floating plate design, which adjusts to different hair sections for enhanced styling. This flexibility allows the straightener to glide effortlessly through the hair, reducing tugging and breakage. For users concerned about hair health, the inclusion of protective ceramic materials helps to smooth the hair cuticle, leaving a shiny and well-finished look.

Both models come with a 60-minute auto shut-off function, providing peace of mind to users who may forget to turn off their devices after use. This added safety feature is especially advantageous for those with hectic lifestyles.

In summary, both the Remington ST3812B and ST4514B are exceptional hair straighteners that boast a range of features aimed at delivering professional results at home. With their combination of innovative technologies, safety features, and user-friendly designs, they stand out as reliable choices for anyone looking to achieve salon-quality hair styling with ease.