Manuals / Renesas / Computer Equipment / Computer Hardware

Renesas H8S/2615 Series user manual User’s Manual, HS2615ECH61H for E6000 Emulator

Models: H8S/2615 Series

1 26

Download 26 pages 11.56 Kb

Page 1

Image 1

H8S/2615 Series

FP-80Q

User System Interface Cable

(HS2615ECH61H) for E6000 Emulator

User’s Manual

ADE-xxx-xxx Rev. 2.0 4/1/03

Renesas Technology Corp.

HS2615ECH61HE

Page 1

Image 1

Renesas user manual User’s Manual, H8S/2615 Series FP-80Q User System Interface Cable, HS2615ECH61H for E6000 Emulator

Contents

H8S/2615 Series FP-80Q User System Interface Cable User’s ManualHS2615ECH61H for E6000 Emulator Page READ FIRST IMPORTANT INFORMATIONREAD this users manual before using this user system interface cable KEEP the users manual handy for future referenceDISCLAIMER LIMITED WARRANTYState Law The Warranty is Void in the Following CasesAll Rights Reserved Other Important Things to Keep in MindDEFINITION OF SIGNAL WORDS SAFETY PAGEREAD this users manual before using this user system interface cable READ FIRSTPARTS Cautions Page Preface Contents Figure 1 HS2615ECH61H User System Interface Cable Section 1 ConfigurationTo emulator station Cable body Screws M2 x 8 mm with flat washers Socket cover IC socketComponent Table 1 HS2615ECH61H ComponentsQuantity Remarks2.1 Connecting User System Interface Cable to Emulator Station Section 2 Connection ProceduresFigure 2 Connecting User System Interface Cable to Emulator Station Emulator station Cable body connector User system interface cable2.2.1 Installing IC Socket 2.2 Connecting User System Interface Cable to User System2.2.2 Soldering IC Socket Check the location of pin 1 before inserting Screws M2 x 12 mm with flat washers Cable head Pin Figure 3 Connecting User System Interface Cable to User SystemIC socket IC149-080-017-B5 manufactured by Connect the cable body to the cable head 2.2.5 Fastening Cable BodyFigure 4 Fastening Cable Body Cable body Removing Push the remove jig Remove jig Cable headFigure 5 Recommended Dimensions for Mount Pad 2.3 Recommended Dimensions for User System Mount PadFigure 6 Dimensions for User System Interface Cable Head 2.4 Dimensions for User System Interface Cable HeadUnit mm Tolerance ±0.5 mm 29.5Cable head 2.5 Resulting Dimensions after Connecting User System Interface Cable21.5 IC socketSection 3 Installing the MCU to the User System Screws M2 x 8 mm with flat washers Socket cover MCU Pin Figure 8 Installing MCU to User SystemIC socket IC149-080-017-B5 manufactured by User systemFigure 9 Oscillator Circuit Section 4 Verifying OperationFigure 11 P1 Short Connector Section 5 NoticeFigure 10 User System Interface Cable Location Example