M30870T-EPB User’s Manual 1. Outline
REJ10J0482-0300 Rev.3.00 February 16, 2006
1. Outline
This chapter describes the package components, the system configuration and the preparation for using this product for the first
time.

1.1 Package Components

The M30870T-EPB package consists of the following items. When unpacking it, check to see if your M30870T-EPB contains
all of these items.
Table 1.1 Package components
Item Quantity
M30870T-EPB emulation probe 1
M30800T-PTC (pre-mounted) converter board for 100-pin LCC 1
IC61-1004-051 100-pin LCC socket made by Yamaichi Electronics Co., Ltd. 1
OSC-3 (32MHz) oscillator circuit board 1
OSC-2 oscillator circuit bare board 1
H/W Tool Customer Registration Sheet (English) 1
H/W Tool Customer Registration Sheet (Japanese) 1
M30870T-EPB Supplementary Document (English) 1
M30870T-EPB Supplementary Document (Japanese) 1
M30870T-EPB User’s Manual (this manual) 1
M30870T-EPB User’s Manual (Japanese) 1
* Please keep the M30870T-EPB's packing box and cushion material in your place for reuse at a later time when sending your
product for repair or other purposes. Always use these packing box and cushion material when transporting this product.
* If there is any question or doubt about the packaged product, contact your local distributor.
* For purchasing the IC61-1004-051 or for technical information, contact Yamaichi Electronics Co., Ltd.
http://www.yamaichi.co.jp/e/index.shtml

1.2 Other Tool Products Required for Development

To bring forward programs development on the M32C/87 Group MCUs, the products listed below are necessary in addition to
those contained package above. Get them separately.
Table 1.2 Other tool products required for development
Product Product name Notes
Emulator main unit PC7501 Required
M32C PC7501 Emulator Debugger Emulator debugger
M3T-PD308F V.3.20 Release 1 Required
144-pin 0.5-mm-pitch LQFP
(144P6Q-A) M3T-FLX-144NSD
M3T-100LCC-QSD
M3T-100LCC-DMS + M3T-FLX-100NSD
100-pin 0.5-mm-pitch LQFP
(100P6Q-A) M3T-F160-100NSD
M3T-100LCC-DMS + M3T-DUMMY100S
M3T-100LCC-DMS + M3T-DIRECT100S
Converter board
100-pin 0.65-mm-pitch QFP
(100P6S-A) M3T-100LCC-DMS + M3T-FLX-100NRB
Required according to the foot
pattern of the user system
(see "2.9 Connecting the User
System" on page 29)
* To purchase these products, contact your local distributor.
Page 13 of 104