Renesas M34282T5-OPT

( 18 / 38 )

(1) Connector J3

Table 4.6 lists the pin assignments of 40-wire half-pitch connector (J3) for connecting the

PCA4029. And Figure 4.4 shows the J3 connector pin layout.

Table 4.6 40-wire half-pitch connector (J3) for connecting PCA4029

Figure 4.4 J3 connector pin layout

(2) J4 connector

For the J4 connector, use the 2-wire external trigger signal cable included with your M34282T5-

OPT board. Connect the black clip to GND and the white clip to the external trigger signal input.

An external trigger signal is used to cause an external trigger break or set an external trigger-

based trace point. Table 4.7 lists the pin assignments of the J4 connector.

Table 4.7 Pin assignments of J4 connector

*"I" in the I/O column denotes "Input"; "O" denotes "Output"; "I/O" denotes "Input/output"; "-"

denotes "Not connected".

Line A Line B Line C Line D

Pin No.

Signal I/O

Pin No.

Signal I/O

Pin No.

Signal I/O

Pin No.

Signal I/O

1 GND 1 GND 1 VSS O1 VDD O

2 GND 2 GND 2 E2I2CARR O

3 GND 3 GND 3 E1I/O 3 D0O

4 GND 4 GND 4 XIN -4 D1O

5 GND 5 GND 5 XOUT -5 D2O

6 GND 6 GND 6 E0I/O 6 D3O

7 GND 7 GND 7 G0I/O 7 D4I/O

8 GND 8 GND 8 G1I/O 8 D5I/O

9 GND 9 GND 9 G2I/O 9 D6I/O

10 GND 10 GND 10 G3I/O 10 D7I/O

Pin No.

Signal

TRIG

GND

Description

External trigger signal input

GND