ResMed S8 Auto 25 manual Starting Treatment, Stopping Treatment

To stop treatment at any time, remove your mask and press . If your clinician has enabled SmartStart/Stop, simply remove your mask and treatment will end.

Note: SmartStart/Stop does not operate if:

• you have a Full Face Mask; or

• Leak Alert is enabled.

Using the Mask-Fitting feature

The S8 Auto 25 includes a mask-fitting feature to help you fit your mask properly. The mask-fitting feature delivers air pressure for a three-minute period, prior to starting treatment, for checking and adjusting your mask fit to minimise leaks.

To use the mask-fitting feature:

1 Fit your mask as described in the mask user instructions.

2 Hold down for at least three seconds until air pressure delivery starts and the following screen appears:

Starting Treatment

1Make sure the power is on.

The product name is displayed briefly on the LCD screen, then the standby (Ramp) screen appears. The key and LCD backlights also turn on.

2Fit your mask as described in the mask user instructions.

WARNING

!A mask should not be used unless your S8 Auto 25 is turned on and operating properly.

3Alter the ramp time if required.

4To start therapy, simply breathe into the mask or press .

5Lie down and arrange the air tubing so that it is free to move if you turn in your sleep.

6After starting therapy, an introductory treatment screen will display:

VAuto	VA:SETL	4.0-10.0	Mode and pressure display
mode	A>>>>	PS 6.0
example	LK: 10L/min	RR: 15
			Leak and breath information
	MV: 10.2	VT: 680
	S**TiMn	TiMx 2.0	Inspiration information
	Ti 1.5s	1: 1.6
	SpO2: 98%		This screen only displays if
	HR : 60	exit	ResLink and an oximeter are
			connected

Stopping Treatment

English

MASK FIT:	*****
excelnt
	Mask-fit star rating

Using the S8 Auto 25 7