ResMed AutoSet CS device can be higher than the temperature of the room, device remains safe

Operating temperature	+5ºC to +35ºC
	Note: The air flow for breathing produced by this therapy
	device can be higher than the temperature of the room.
	Under extreme ambient temperature conditions (40ºC) the
	device remains safe.
Operating humidity	10–95% non-condensing
Operating altitude	Sea level to 2,591 m
Storage and transport temperature	-20ºC to +60ºC
Storage and transport humidity	10–95% non-condensing
Housing construction	Flame retardant engineering thermoplastic
Supplemental oxygen	Recommended maximum supplemental oxygen flow:
	4 L/min (VAuto or ASV mode); 15 L/min (S, ST or T mode)
Hypoallergenic air filter	Non-woven acrylic and polypropylene fibers with
	polypropylene carrier
Standard air filter	Polyester fiber
SlimLineTM air tubing	Flexible plastic, 1.8 m, 15 mm inner diameter
Standard air tubing	Flexible plastic, 2 m, 19 mm inner diameter
ClimateLine heated air tubing	Flexible plastic and electrical components, 2 m, 15 mm
	inner diameter
ClimateLineMAX heated air tubing	Flexible plastic and electrical components, 1.9 m, 19 mm
	inner diameter
Air outlet	The 22 mm conical air outlet complies with ISO 5356-1
Electromagnetic compatibility	Product complies with all applicable electromagnetic
	compatibility requirements (EMC) according to
	IEC60601-1-2, for residential, commercial, and light industry
	environments.
	It is recommended that mobile communication devices are
	kept at least 1 m away from the device.
	Information regarding the electromagnetic emissions and
	immunity of these ResMed devices can be found on
	www.resmed.com, on the Products page under Service
	and Support. Click on the PDF file for your language.

8 English