•Do not use electrically conductive or antistatic air tubings.
•Do not use the air tubing if there are any visible signs of damage.
•Only ResMed air tubing and accessories should be used with the device. A different type of air tubing or accessory may alter the pressure you actually receive, reducing the effectiveness of the treatment.
•Only use the ResMed 90W or 30W power supply unit. Use the 90W power supply unit to power the system comprising the device, H5i, air tubing, DC/DC converter and battery pack. The 30W power supply unit is designed to power the device only and recommended for traveling.
•Only ResMed products are designed to be connected to the module connector port. Connecting other devices could damage the device.
•Blocking the air tubing and/or air inlet of the device while in operation could lead to overheating of the device.
CAUTIONS
•Do not open the device enclosure. There are no user serviceable parts inside. Repairs and servicing should only be performed by an authorised ResMed service agent.
•Do not use bleach, chlorine, alcohol, or
•Incorrect system setup may result in incorrect mask pressure reading. Ensure the system is correctly set up.
•Be careful not to place the device where it can be bumped or where someone is likely to trip over the power cord.
•Make sure the area around the device is dry and clean and clear of bedding, clothes or other objects that could block the air inlet or cover the power supply unit.
•Ensure that the device is protected against water if used outdoors. Enclose the device in the S9 travel bag for transport.
13 English
