![](/images/new-backgrounds/1150436/15043615x1.webp)
Controls and Connections:
1.Channel LED indicators: Displays microphone mute and pairing states.
2.Diversity Antenna: One or two sets (4 channel or 8 channel).
3.Pairing Push Buttons: For pairing microphones to Base Station.
4.Two Line LCD Display for front panel operation, command and control.
5.Navigation Buttons for menus on front panel LCD interface. (See Section Using the Base Station Front Panel Display)
6.On/Off Switch: Powers up unit.
7.Power In Receptacle
8.Ethernet Port
9.System Reset Button
10.
11.
12.Base station status LED‘s (see Section Revolabs Executive HD ™ Indicator LEDs)
13.Configuration DIP Switches (see Section Using the Rear Panel Configuration DIP switches)
14.
The Revolabs Executive HD ™ Base Station is designed to be installed into a standard 19‖ AV rack using the attached rack ears.
To Install the Base Station:
1.Plug the power cord into an appropriate outlet.
2.Turn the
3.Attach the diversity antennas (2 or 4 SMA female connectors).
- 8 -