Troubleshooting

You don't get a signal at all

Make sure the camera and the monitor are turned on.

Make sure the power plugs are pushed all the way in.

If the camera/monitor is powered by batteries, replace all batteries with new ones.

If the signal is poor, or there is interference

If there is a microwave oven in use in the path between the camera and monitor, remove the microwave oven or turn it off.

Make sure the camera and the monitor is within range of each other (range of approximately 450 feet; 150 meters in a clear line of sight).

If the power LED is on but only voice signal input is detected, the monitor can be in voice-activated mode. Press the Auto button to turn on the screen.

Care and Maintenance

Keep all parts and accessories out of children's reach.

Fingerprints or dirt on the lens surface can adversely affect camera performances. Avoid touching the lens surface with your fingers.

Should the lens become dirty, use a blower to blow off dirt and dust, or a soft, dry cloth to wipe off the lens.

Keep the camera dry. Precipitation, humidity, and other liquids contain minerals will corrode electronic circuits.

Do not use or store in dusty, dirty areas.

Do not store in hot areas. High temperatures can shorten the life of electronic devices and/or melt certain plastics.

Do not store in very cold areas. When the system warms up (to its normal temperature), moisture can form inside the case, which may damage electronic circuit boards.

8

Page 8
Image 8
RF-Link Technology ABM-4161 user manual You dont get a signal at all, If the signal is poor, or there is interference