Rheem GEN15ADC-E, GEN20AD-E, GEN16AD-E, Rheem / Ruud standby generator Advanced Settings Screen

Advanced Settings Screen

Advanced setting parameters are preset at the factory for a typical installation. To view Advanced Settings items and/or to change items, follow the instructions listed below.

NOTICE Advanced settings are critical to the operation of the unit. Careful consideration should be taken when working in the Advanced Settings menu. Exercise caution when selecting and verifying parameters for the generator and region where the generator is being operated. Confirm all settings before operating the generator for the first time.

For advanced menu items, press and hold the left arrow, right arrow, and escape key	for 3 seconds. Follow
the prompts as outlined below.

NOTICE In the Advanced Setting menu, a three button access code (left arrow, right arrow, and escape key must be pressed once to enter the menu and again to change any setting. After each confirmation of a setting, the selection will display solid for 2 seconds before moving to the next program item.

kW	kW
	FLASHING
or	or

Hz	50/60 Hz
	FLASHING
or	or

PHASE

or

VOLTS

or

E-Governor

Check

or

SOFTWARE

Version Displayed

SINGLE

or

THREE

FLASHING

or

VOLTS

FLASHING

or

Stepper Motor

will sweep through throttle

range for dealer

visual verification

or

30