Perform Maintenance Safely

Hydraulic System Hazards

The hydraulic system is under pressure whenever the engine is operating and may hold pressure even after the engine is shut off. Cycle all hydraulic controls including the auxiliary hydraulic control after the engine is shut down. Relieve trapped pressure in the lines after the attachments are shut down and resting on the ground.

During inspection of the hydraulic system:

—Wait for fluid to cool before disconnecting the lines. Hot hydraulic fluid can cause SEVERE BURNS.

—Do not use your hand to check for leaks. Instead, use a piece of cardboard or paper to search for leaks.

—Wear appropriate eye protection. Hydraulic fluid can cause permanent eye injury.

WARNING! Hydraulic fluid under pressure can penetrate the skin or eyes and cause serious injury, blindness or death. Fluid leaks under pressure may not be visible.

Use a piece of cardboard or wood to find leaks, not your hand. Wear a face shield or safety goggles for eye protection. If fluid is injected into the skin, it must be removed within a few hours by medical personnel familiar with this type of injury.

When venting or filling the hydraulic system, loosen the filler cap slowly and remove it gradually.

Never reset any relief valve in the hydraulic system to a pressure higher than recommended by the manufacturer.

Wear

Eye Protection

High Pressure

Fluid Can Inject

Into the Body

Perform Maintenance Safely

Electrical System Hazards

Before working on the electrical system, disconnect the battery cable(s).

—Remove the battery negative (-) cable(s) first.

—When reconnecting the battery, connect the battery negative (-) cable(s) last.

The liquid in batteries contains acid, which is a POISON and can cause SEVERE CHEMICAL BURNS.

Avoid Injury

—Wear a face shield to prevent contact with your eyes.

—Wear chemical-resistant gloves and clothing to keep electrolyte off your skin and regular clothing.

WARNING! Electrolyte will damage eyes or skin on contact. Always wear a face shield to avoid electrolyte in eyes. If electrolyte contacts eyes, flush immediately with clean water and get medical attention.

Wear chemical-resistant gloves and protective clothing to keep electrolyte off skin. If electrolyte contacts exposed skin or clothing, wash off immediately

with clean water. If electrolyte is ingested, seek medical attention immediately. NEVER give fluids that would induce vomiting.

Wear

Face Protection

Wear

Protective

Clothing

23

Page 62 Page 64
Page 63
Image 63
Rhino Mounts SE8A manual Hydraulic System Hazards, Electrical System Hazards, Avoid Injury
Page 62 Page 64

SE8A specifications

The Rhino Mounts SE8A is a robust and versatile mounting solution designed for a variety of applications in both professional and casual settings. Known for its innovative design and durability, the SE8A caters to a wide range of users, including filmmakers, content creators, and industrial professionals.

One of the standout features of the SE8A is its compatibility with a variety of equipment, such as cameras, monitors, and other accessories. It supports standard 1/4-20 and 3/8-16 threads, making it easy to mount multiple devices simultaneously or switch between them without hassle. This versatility is crucial for users looking to efficiently leverage their gear in various settings, whether shooting on location or stabilizing devices in a controlled environment.

The design of the SE8A incorporates lightweight yet sturdy materials, allowing for easy transport while ensuring reliability and stability during use. The mount itself has been engineered to handle significant weight without compromising structural integrity, ensuring that equipment remains secure, even under demanding conditions. This robustness is particularly beneficial for outdoor shoots where environmental factors can influence equipment performance.

Another notable technological feature of the SE8A is its adjustable arm mechanism. Users can easily customize the positioning of their devices to achieve the perfect angle for shooting or monitoring. This adaptability allows for creativity during filming and ensures optimal visibility for monitoring purposes. The smooth adjustability reduces the time spent on setups and enables users to focus more on their creative processes.

Additionally, the Rhino Mounts SE8A includes anti-slip rubber grips to prevent any unwanted movement when mounted. This feature is essential for maintaining the desired configuration, ensuring stable shots without the risk of drifting. Users can have confidence in the mounting stability even during dynamic shooting scenarios.

Moreover, the SE8A is designed for quick installation and disassembly. The intuitive locking mechanism allows users to swiftly secure their devices in place or detach them when necessary, making transitions seamless and user-friendly. This ease of use is especially beneficial for professionals who are often on the move and need a reliable solution that won’t consume valuable time.

In conclusion, the Rhino Mounts SE8A is an exceptional mounting solution that combines durability, versatility, and practicality. With features like compatibility, lightweight design, adjustable arms, and anti-slip technology, it is sure to enhance the efficiency and creativity of any user’s workflow, making it a valuable tool for anyone in need of reliable equipment mounting.
Top Page Image Contents