OPERATION

Shorten the driveline profiles as follows:

•Remove the driveline from the tractor.

•Position the mower (Lift and Semi-Mount Type - Raise and lower/ Pull Type - Turn sharply) to the point with the shortest distance between the tractor PTO shaft and cutter gearbox. Shut down the tractor and securely block the mower in this position.

•Pull driveline apart and reattach yoke to PTO shaft.

•Hold driveline sections parallel to one another and measure back 1” from yoke of each shaft and place mark on opposite section. Cut this length off with a saw.

•Round off all sharp edges and debur.

•Thoroughly grease then reinstall the driveline.

•Recheck for proper operation.

Engagement Check Procedure

•With the driveline attached, position the mower to the point where the telescoping driveline is at its maximum extension. Completely shut down the tractor and secure in position.

•Mark the inner driveline shield 1/8” from the end of the outer shield.

•Disconnect the driveline from the tractor and separate the two driveline halves.

•Measure the distance from the mark to the end of the inner profile. This length is the amount the driveline profiles were engaged.

•If the engaged length is less than 12” for a CV driveline and less than 6” for a non-CV driveline, the shaft is

considered too short and should be replaced with a longer shaft. Consult an authorized dealer to purchase the required driveline length.

NOTE: When raising the mower, at least 1” clearance must be maintained between the driveline and the mower deck. If necessary, place an upper lift stop on the 3-point hitch control lever to limit the height the mower can be raised. OPS-R-0005-G

SE8A 01/11

Operation Section 4-17

© 2011 Alamo Group Inc.

OPERATION

Page 124 Page 126
Page 125
Image 125
Rhino Mounts SE8A manual Shorten the driveline profiles as follows, Engagement Check Procedure
Page 124 Page 126

SE8A specifications

The Rhino Mounts SE8A is a robust and versatile mounting solution designed for a variety of applications in both professional and casual settings. Known for its innovative design and durability, the SE8A caters to a wide range of users, including filmmakers, content creators, and industrial professionals.

One of the standout features of the SE8A is its compatibility with a variety of equipment, such as cameras, monitors, and other accessories. It supports standard 1/4-20 and 3/8-16 threads, making it easy to mount multiple devices simultaneously or switch between them without hassle. This versatility is crucial for users looking to efficiently leverage their gear in various settings, whether shooting on location or stabilizing devices in a controlled environment.

The design of the SE8A incorporates lightweight yet sturdy materials, allowing for easy transport while ensuring reliability and stability during use. The mount itself has been engineered to handle significant weight without compromising structural integrity, ensuring that equipment remains secure, even under demanding conditions. This robustness is particularly beneficial for outdoor shoots where environmental factors can influence equipment performance.

Another notable technological feature of the SE8A is its adjustable arm mechanism. Users can easily customize the positioning of their devices to achieve the perfect angle for shooting or monitoring. This adaptability allows for creativity during filming and ensures optimal visibility for monitoring purposes. The smooth adjustability reduces the time spent on setups and enables users to focus more on their creative processes.

Additionally, the Rhino Mounts SE8A includes anti-slip rubber grips to prevent any unwanted movement when mounted. This feature is essential for maintaining the desired configuration, ensuring stable shots without the risk of drifting. Users can have confidence in the mounting stability even during dynamic shooting scenarios.

Moreover, the SE8A is designed for quick installation and disassembly. The intuitive locking mechanism allows users to swiftly secure their devices in place or detach them when necessary, making transitions seamless and user-friendly. This ease of use is especially beneficial for professionals who are often on the move and need a reliable solution that won’t consume valuable time.

In conclusion, the Rhino Mounts SE8A is an exceptional mounting solution that combines durability, versatility, and practicality. With features like compatibility, lightweight design, adjustable arms, and anti-slip technology, it is sure to enhance the efficiency and creativity of any user’s workflow, making it a valuable tool for anyone in need of reliable equipment mounting.
Top Page Image Contents